XAG P100 2022, Pilot Operating Handbook

Page: 113 / 145

113
XAG AUSTRALIA
Aerial Flights
Safety Guidelines
🧷
IMPORTANT
√ Make sure you have been sufficiently trained and have contingency plans for emergency
situations or for when accidents occur.
√ Land the aircraft on flat terrain to avoid damaging the Aircraft from uneven terrain or raised
objects.
√ Land immediately when there is any abnormality in flights. (Including but not limited to the
Aircraft NOT flying in a straight line, NOT maintaining the correct altitude, and etc...)
√ In the event of any flight abnormality, crash or collision, make sure to thoroughly inspect every
part of the aircraft and make any necessary repairs and replacements before your next flight.
√ The radar module enables the aircraft to maintain a fixed distance from vegetation only within
its working range. Observe the aircraft’s distance from vegetation at all times.
√ Operate with extra caution when flying over inclined terrains. Recommended maximum
inclination at different aircraft speeds:
• 10º > at 3m/s
• 6º > at 5m/s
• 3º > at 7m/s
√ RTH will not work if there is a weak or no GNSS Signal.
√ Tall objects may adversely affect RTH. Therefore, it is important to set an appropriate failsafe
altitude before each flight. Adjust the aircraft location, altitude, and speed while returning home
to avoid obstacles when there is a strong remote controller signal.
√ Make sure to operate the aircraft within the transmission range of the Remote Controller and
RTK Station.
√ Make sure you understand the nature of your flight operation and have obtained corresponding
approval and clearance from the land owners, and related government agencies before flight.
Consult with your local regulators for comprehensive definitions and specific requirements
√ Make sure to keep your aircraft within VLOS, and use an observer to assist if needed.
√ The maximum flight distance is 800m by default. Fly with Caution and ensure there are sufficient
battery for the aircraft to return to Home Point.
If you have any problems or question, contact your local supplier or an XAG authorized dealer.
XAG Australia Support Hotline: +61 2 9167 6665 (Australia Only)
XAG Australia Support Email:
Support@xagaustralia.com.au