XAG AUSTRALIA
40
01
LED – Battery Level
Indicates the Battery Level of the Remote Controller
02
LED – Smart Device Status
Indicates whether the remote controller is connected to Smart Device
03
LED – Device Status
Indicates whether the remote controller is linked to the Aircraft
04
LED – Control Mode
Indicates the Flight mode of the Device (Manual / Autonomous)
05
LED – Terminal Status
Indicates whether the remote controller is connected to Terminal
06
LED – RTK Status
Indicates the RTK Status of the Remote Controller
07
Heat Sink
Used to dissipate heat from internal Components
08
Spray/
Increase the rate of Spray / Spread
09
Spray / Spread Button
Press to Enable / Disable Spray or Spread
10
Spray/Spread –
Decrease the rate of Spray / Spread
11
Speed +
Increase Speed
12
Speed Broadcast Button
Press to broadcast the current Speed
13
Speed –
Decrease Speed
14
Button A
Mapping Mode: Add Point
15
Smart Mode Button
Long Press to Enter / Exit mapping Mode
16
Button B
Mapping Mode: Undo previous Added Point
17
Yaw Control – Left
Rotate Device CCW (Counter-Clockwise)
18
Yaw Control – Right
Rotate Device CW (Clockwise)
19
Terrain Button
Used to Broadcast and Turn ON/OFF Terrain Following
20
RTH Button
Press and Hold this RTH button to initiate Return to Home (RTH)
21
Directional Control – Forward
Press and Hold to command the Aircraft to fly Forward
22
Directional Control – Sideway Right
Press and Hold to command the Aircraft to fly Sideway to the Right
23
Directional Control – Backward
Press and Hold to command the Aircraft to fly Backward
24
Directional Control – Sideway Left
Press and Hold to command the Aircraft to fly Sideway to the Left
25
Hover Button
Press to Hover or Long Press to resume Autonomous Operation
26
Power Button
Used to turn ON/OFF the remote controller
27
Nano SIM Slot
Provides Cellular connection
28
Al
Increase Altitude
29
Altitude –
Decrease Altitude
30
Power Port
Connects to a power source to charge the Remote Controller
