X2E XORAYA ML-N4000, User Manual

Page: 31 / 190

U
SER
M
ANUAL
C
OMMISSIONING
31
4.7 Configuring switches

Configure the built-in terminators via the rotary switches on the back
of the ML-N4000.
 For the LIN interface, select between internal or external power supply
via the toggle switch.
4.7.1 4x CAN
Position Resistance
0 Open (∞)
1 2.6 kΩ
2 120 Ω
The channels 3 and 4 have the value Open and, therefore, are not
terminated.
4.7.2 2x FlexRay
Position Resistance
0 Open (∞)
1 2,6 kΩ
2 90 Ω
4.7.3 7x LIN
Position Power supply
Vi Internal
Ve External
Use the internal power supply of the LIN measurement card only if the
connected LIN device uses the ML-N4000 voltage as a reference voltage.
Bear in mind that this is not possible when using the ML-N4000 in a 24-V
electrical system, for example. In this case, connect the external power
supply port to the corresponding reference voltage.