X2E XORAYA ML-N4000, User Manual

Page: 47 / 190

U
SER
M
ANUAL
X
ORAYA
S
UITE
47
Static MAC to IP assignment when DHCP server is active:
5 Close MAC-IP assignments 7 Refresh table of PCs in the network
6 Delete MAC-IP assignment
DHCP server mode is intended for direct connections to PCs. You can bind
MAC addresses of up to five PCs to IP addresses. Type them in manually or
double-click in a row of the table that contains the addresses of the PCs in
the network.
Red exclamation marks flag PCs outside the IP range.
Special care in network settings
Exercise extreme caution when changing these settings.
Under certain circumstances, incorrect network settings
of the ML-N4000 cannot be corrected.
In this case, you should reset the ML-N4000 back to
factory defaults by pressing the default button
(D) for 3
seconds. (
➔
Connections and controls)