X-Trax VP-1003 User Manual Download Page 24

Page: 24 / 60

- 24 -

VLAN ID Check Enable

Enable VLAN ID check by selecting it. After enable VLAN ID

check, if VLAN ID of a data package is not the same with the
phone’s or a data package do not have VLAN ID, the data package

will be discarded.

Voice/Data VLAN

differentiated

After enable VLAN, system will set packets with different type of

VLAN ID. Undifferentiated means after using VLAN, both VoIP

packets and other data packets will use the voice VLAN ID; tag

differentiated means after using VLAN, VoIP(signal and voice)

packets will add voice VLAN ID, and other data packets will add

data VLAN ID; data untagged means after using VLAN, only VoIP

packets will add voice VLAN ID. Other data packets will not use

VLAN.

DiffServ Enable

Select it or not to Enable or disable DiffServ.

DiffServ Value

Set DiffServ value, the common value is 0x00.

Voice 802.1P Priority

Specify 802.1P Priority of voice/signal data package.

Data 802.1P Priority

Set 802.1p of data VLAN. Non-VoIP data (such as http, telnet, ping

etc) will use this value to set VLAN package.

Voice VLAN ID

Set VLAN ID of voice/signal data package.

Data VLAN ID

Set 802.1q of data VLAN ID. Non-VoIP data (such as http, telnet,

ping etc) will use this value to set VLAN package.

NOTICE

：

）

Startup VLAN, if set Voice/Data VLAN differentiated as Undifferentiated, all packets will

use the Voice VLAN ID as the tag.

2) Startup VLAN, if set Voice/Data VLAN differentiated as tag differentiated and disables the

DiffServ, then system will not distinguish the voice and data, all packets will use the Voice

VLAN ID as the tag.

3) Startup VLAN, if set Voice/Data VLAN differentiated as tag differentiated and enables the

DiffServ, then system will distinguish the voice and data and add the VLAN ID each other.

4) Startup VLAN, if set Voice/Data VLAN differentiated as data untagged, then the packet of

the signal/voice will use the Voice VLAN ID as the tag, but the data packets will not take

the VLAN tag.

5) If Disable the VLAN, regardless to set the Voice/Data VLAN differentiated or not, all

packets will not take the VLAN tag; If enable the DiffServ, all packets will only take the

DiffServ value.

6) One must to notice, enable the VLAN ID Check Enable that is default, If enable it, the phone

will match the VLAN ID strictly. When others' VLAN ID not match with us, the packets

will discard. Contrarily, the phone will accept the packets with the distinct VLAN ID.

7) You must gain the IP with the Static mode when you set VLAN, otherwise can't gain the IP

in the VLAN and also can not dial with point to point.

4.3.2.4. Service Port

You can set the port of telnet/HTTP/RTP by this page.

Summary of Contents for VP-1003





























































Search results

Summary of Contents for VP-1003

Reviews:

Related manuals for VP-1003

Brands by name

Popular brands

X-Trax VP-1003, User Manual

Search results

Summary of Contents for VP-1003

Reviews:

Related manuals for VP-1003

Brands by name

Popular brands