- 42 -
the secondary dial tone, user may keep going dialing. After finished, phone will call the number
which starts with 9; actually the number sent out is 9-digit with 9.
Digital Map Configuration
Field name
explanation
End with "#"
Set Enable/Disable the phone ended with “#” dial.
Fixed Length
Specify the Fixed Length of phone ending with.
Time out
Set the timeout of the last dial digit. The call will be sent after
timeout.
Below is user-defined digital map rule:
[] Specifies a range that will match digit. May be a range, a list of ranges separated by commas,
or a list of digits.
x Match any single digit that is dialed.
. Match any arbitrary number of digits including none.
Tn Indicates an additional time out period before digits are sent of n seconds in length. n is
mandatory and can have a value of 0 to 9 seconds. Tn must be the last 2 characters of a dial
plan. If Tn is not specified it is assumed to be T0 by default on all dial plans.
Cause extensions 1000-8999 to be dialed immediately
Cause 8 digit numbers started with 9 to be dialed immediately
Cause 911 to be dialed immediately after it is entered.
Cause 99 to be dialed after 4 seconds.
Cause any number started with 9911 to be dialed 4 seconds after dialing ceases.
