- 12 -
Using handset
Hook off (screen will show the current using line, or you could press key L1-L3 to select), after
getting dialing tone, you could begin to dial number. After finishing it, press # and VP-1003 will
send the number and call the number. When you hear a ring-back tone and screen shows the
callee’s number, it shows that the person you called is ringing. If callee answers the call, you can
begin to talk and your phone will keep showing callee’s number and counting time. Just hang up
to finish talk.
Using hands-free
Press
（
screen will show the current using line, or you could press key L1-L3 to select), after
getting dialing tone, you could begin to dial number. After finishing it, press # and VP-1003 will
send the number and call the number. When you hear a ringback tone and screen shows the
callee’s number, it shows that the person you called is ringing. If callee answers the call, you can
begin to talk and your phone will keep showing callee’s number and counting time. Press
again to finish talk.
Using directory
Press
in stand-by mode, you will access to phonebook. If there are many persons
records stored in the directory, you can use
&
to select number or press the first
character of the name for searching the person which you want to contact. Press
to
forward
，
and press
to backward. Press Soft2 (Dial) to dial the current number shown on
the screen.
Speed dial
Speed dial means user can make calls directly without hook off or using hands-free. User can dial
number in stand-by mode, but first, user need to add and edit SDial no. By pressing Soft2 (SDial)
to edit and save the number to be a SDial number. In this way, user could make a call only press
the number and Soft3 (Dial).
Multi-line calls
VP-1003 supports 3 SIP lines, that is user could use 3 SIP accounts to register and make calls.
System will use SIP 1 as default line to call.
There are most two calls at the same time. Screen will display the incoming call number when
user is keep talking. You can press Soft1 (Answer) to accept it, and hold the first one (if you want
to use this function, you need enable Call Waiting of the phone first). Use Soft1 (Switch) to switch
the two calls to talk.
3.3. End calls
Hang up with handset hook on
