6
®
LEADERS IN POLE & AERIAL FITNESS
Copyright© Vertical Leisure Ltd. 2020 Version 3.0
All rights reserved.
Assembly - Carry case wheels
Hex Screw
Hex Screw with Dome head
Hex Screw with Dome head
Hex Key hole
Rounded Hex Key hole
Hex Screw
Hex Screw
Hex Screw with Dome head
Hex Screw with Dome head
Hex Key Fully inserted
Hex Key Partly inserted
Locate inner frames
where screws are
pre-fixed.
Hex Screw with dome head
Caster wheel
4mm Hex Key
Locate inner frames
where screws are
pre-fixed.
Hex Screw with dome head
Fixed wheel
Fixed wheels
Locate the pre-fixed screws on the underside of the Carry Case’s sub-chassis where the wheel assemblies attach.
Secure the wheels using the - 4x hex screws (pre-fixed) per wheel, using the 4mm hex key. The wheel assemblies have
elongated slots in them to allow some movement on the sub-chassis frame. Position both wheels equally before tightening
the hex screws.
TIP: Easiest method to attach the wheels is to remove just one pre-fixed screw, very loosely
attach the wheel (turn the screw only 4-5 rotations) then remove the other screws and install them.
Fig. (4.1)
X-Stage - Main Frame Carry Case (Back)
Fig. (4.2)
X-Stage Lite - Main Frame Carry Case (Back)
Screw installation
CAUTION: You must ensure that a hex key is fully inserted into the hex screw before attempting
to tighten any screws (Fig.4.3). Partial insertion will damage the screw heads (round them)
(Fig.4.4) making it difficult to tighten, or more importantly, undo them. If you damage any screws
- please make sure they are replaced. Spare parts can be purchased from your main dealer/point
of purchase.
Fig. (4.3)
Fig. (4.4)
Hex Screw