XDS PRO4-P Receiver User‟s Guide
X-Digital Systems
Rev K - July 29, 2008
51
When a new schedule is created or modified, the scheduler will check to see if there
are any conflicting schedules with the new schedule. If a conflict is found, a new
window will appear where prioritization can be set for playback conflicts.
Figure 35 Prioritize Overlapping Schedules
5.3
Changing the Relay Mappings
There are 32 different relays on the PRO4-P receiver, and each of these relays can
correspond to a different netrelay for a radio broadcast. You can use the NMS to specify
the relay mapping for the receiver. To do this
Click Relay Mappings at the top of the page beneath the X-Digital Systems logo.
Click the “Edit” button in the top right.
Edit the text for the corresponding relay you wish to change. To edit a cell, simply
click in it and it will expand automatically.
When done changing relays, press “Save”.
To cancel the changes you have made and to go back to the previous relay mapping,
click “Cancel”.
Note!
Netrelay
s entered into the NMS’s relay-mappings text box bust be
upper-case alphanumeric, i.e. only upper-case letters, or
numbers.
5.4
Port Schedules
The PRO4-P is capable of managing up to eight different radio stations on the four audio
ports. In order to allow different stations to play on the same port, the receiver uses a
port scheduler. Click the „Port Schedules‟ from the top of the site or „Set my port
schedules‟ when first logging into the Affiliate site to access the port schedules:
