XDS PRO4-P Receiver User‟s Guide
X-Digital Systems
Rev K - July 29, 2008
28
3.2.5 MONITOR AND CONTROL INTERFACE
In addition to the front panel and the Affiliate Website, the PRO4-P Receiver is equipped
with an M&C console port on the back of the receiver. This port can be used to access
the command line interface of the receiver. In addition to the M&C port on the back of
the receiver, the console can be reached via a telnet terminal on port 2000. All console
commands are the same through the rear port or through a telnet terminal.
3.3
Setting up a Console Connection
To set up a console interface from your computer to the receiver:
Connect a standard serial cable from the serial port on your computer to the port
labeled “Console” on the back of the receiver.
Open HyperTerminal from the Start Menu: Start > All Programs > Accessories >
Communication > HyperTerminal.
In the Connection Description dialog, enter “XDS PRO4-P Console” as the
connection Name, and select a connection Logo. Press “OK”.
Figure 11 Connection Description
In the „Connect To‟ dialog, select “COM1” in the Connect using drop down list.
Figure 12 Connect To
