Würth GS 700-E, Operating Instructions Manual

Page: 19 / 240

19
Technical data
Unit Item 0702 520 x Item 0702 521 x Item 0702 552 x
S (spindle lock for tool changing)
 
n (idle speed (maximum speed)) /min 13000 - 34000 10000 - 30500 2500 - 8700
n
1
(load speed) /min 24000 24000 7200
P
1
(rated power consumption) W 710 710 950
P
2
(power output) W 430 430 510
D
max
(max. grinding wheel diameter) mm (in) 43 (1
11
/
16
) 50 (2) 55 (2
5
/
32
)
T
max
(max. thickness of bonded grinding wheels) mm (in) 6 (¼) 6 (¼) 6 (¼)
d (clamping bore of the collet) mm (in) 6 (¼ ") 6 (¼ ") 6 (¼ ")
m (weight) kg (lbs) 1,4 (3.1) 1,6 (3.6) 1,7 (3.8)
Speed level Item 0702 520 x Item 0702 521 x Item 0702 522 x
1 13000 min
-1
10000 min
-1
2500 min
-1
2 18000 min
-1
14000 min
-1
4000 min
-1
3 23000 min
-1
18500 min
-1
5500 min
-1
4 27000 rpm 22000 rpm 7000 rpm
5 30500 rpm 26000 rpm 8000 rpm
6 34000 rpm 30500 rpm 8700 rpm
Noise / vibration
The measured values conform to EN 60745.
Unit Item 0702 520 x Item 0702 521 x Item 0702 522 x
a
h, SG
/K
h, SG
*) m/s
2
6,8/1,5 5,6/1,5 < 2,5/1,5
a
h, SG
/K
h, SG
*) m/s
2
- 16,9/1,5 < 2,5/1,5
L
pA
/K
pA
dB(A) 82/3 80/3 87/3
L
WA
/K
WA
dB(A) 93/3 91/3 98/3
ah, SG = Vibration emission value LWA = Sound power level
K
h, SG
= Uncertainty (vibration) K
pA
,K
WA
= Uncertainty
L
pA
= Sound pressure level
*) The vibration emission values indicated:
• Have been measured using a standardised test procedure and can be used for comparing one
power tool with another.
• Can be used for a rough estimate of the emissions.
The noise level may exceed 80 dB (A) during work. Wear your hearing protection!
Electromagnetic interference:
Under the effect of extreme electromagnetic interference from the
outside, transient speed fluctuations or tripping of the restart protection may occasionally occur. In this case
switch the machine off and on again.