manualshive.com logo in svg

WTI NPS-16HD20-1, User Manual

Introducing the WTI NPS-16HD20-1, a cutting-edge device designed to redefine your user experience. Discover its limitless possibilities with our comprehensive User Manual, available for free download. Unlock the true potential of this product and unleash your creativity. Visit manualshive.com to access your free manual today!

Share
Download
background image

iv

Table of Contents

1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

2.  Unit Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

 

2.1.  VMR Standard Series - Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

 

2.2.  VMR Standard Series - Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

 

2.3.  VMR-HD4D Series - Front Panel  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

 

2.4.  VMR-HD4D Series - Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

 

2.5.  VMR-HD4D-8 Series - Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

 

2.6.  VMR-HD4D-8 Series - Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

 

2.7.  VMR-12B Series - Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7

 

2.8.  VMR-12B Series - Back Panel  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

 

2.9.  NPS Series - Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

 

2.10.  NPS Series - Back Panel  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10

 

2.11.  Additional Button Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11

3.  Getting Started  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

 

3.1.  Installing the VMR or NPS Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

 

 

3.1.1.  Apply Power to the VMR or NPS  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

 

 

3.1.2.  Connect your PC to the VMR or NPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

 

3.2.  Communicating with the VMR or NPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

 

3.3.  The WMU Enterprise Management Solution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

4.  Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

 

4.1.  Connecting the Power Supply Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

 

 

4.1.1.  Installing the Power Supply Cable Keepers . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

 

 

4.1.2.  Connect the VMR or NPS to Your Power Supply . . . . . . . . . . . . . . . . . . . . . . . 4-2

 

4.2.  Connection to Switched Outlets  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

 

4.3.  Serial SetUp Port Connection  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

 

 

4.3.1.  Connecting a Local PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

 

 

4.3.2.  Connecting an External Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

 

4.4.  Connecting the Network Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

 

4.5.  Rack Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

 

4.6.  Emergency Shut Off Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

5.  Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

 

5.1.  Communicating with the VMR/NPS Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

 

 

5.1.1.  The Text Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

 

 

5.1.2.  The Web Browser Interface  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

 

 

5.1.3.  The WMU Enterprise Management Solution . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

 

5.2.  Controlling Power - Web Browser Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4

 

 

5.2.1.  The Plug Control Screen - Web Browser Interface  . . . . . . . . . . . . . . . . . . . . . 5-4

 

 

5.2.2.  The Plug Group Control Screen - Web Browser Interface . . . . . . . . . . . . . . . . 5-5

 

5.3.  Controlling Power - Text Interface  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

 

 

5.3.1.  The Port and Plug Status Screen - Text Interface  . . . . . . . . . . . . . . . . . . . . . . 5-6

 

 

5.3.2.  Switching and Reboot Commands - Text Interface . . . . . . . . . . . . . . . . . . . . . 5-7

 

 

 

5.3.2.1.  Applying Commands to Several Plugs - Text Interface . . . . . . . . . . 5-9

 

5.4.  The Automated Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10

 

5.5.  Manual Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-11

 

5.6.  Logging Out of Command Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-11

 

5.7.  Emergency Shut Off Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-11

Summary of Contents for NPS-16HD20-1



















































































































































































Reviews:

No comments

Related manuals for NPS-16HD20-1

TC Electronic M300 Service Manual preview
M300
Brand: TC Electronic Pages: 2
Watchguard Wireless Router Quick Start Manual preview
Wireless Router
Brand: Watchguard Pages: 11
D-Link DWR-712 Quick Installation Manual preview
DWR-712
Brand: D-Link Pages: 32
D-Link DIR-456 Quick Installation Manual preview
DIR-456
Brand: D-Link Pages: 28
D-Link DIR-820 Quick Installation Manual preview
DIR-820
Brand: D-Link Pages: 48
D-Link EXO DIR-2660 Quick Installation Manual preview
EXO DIR-2660
Brand: D-Link Pages: 83
D-Link DIR-508L User Manual preview
DIR-508L
Brand: D-Link Pages: 155
Dave Embedded Systems ARM Cortex-A9 MPCore Quick Start Manual preview
ARM Cortex-A9 MPCore
Brand: Dave Embedded Systems Pages: 67
H3C H3C S7500E-X Command Reference Manual preview
H3C S7500E-X
Brand: H3C Pages: 16
H3C SR6600 SPE-FWM Configuration Manual preview
SR6600 SPE-FWM
Brand: H3C Pages: 24
Nayar Systems GSR Manual preview
GSR
Brand: Nayar Systems Pages: 37
Javad TRIUMPH-3NR User Manual preview
TRIUMPH-3NR
Brand: Javad Pages: 35
TE Connectivity InterReach Fusion ADCP-77-044 Manual preview
InterReach Fusion ADCP-77-044
Brand: TE Connectivity Pages: 236
Furuno 001-558-430 Replacement Instructions Manual preview
001-558-430
Brand: Furuno Pages: 24
Macsense MIH-108 User Manual preview
MIH-108
Brand: Macsense Pages: 39
Avaya XM24 Expansion Module Installation Instructions preview
XM24 Expansion Module
Brand: Avaya Pages: 5
3Com 3C589D User Manual preview
3C589D
Brand: 3Com Pages: 50
Moxa Technologies TAP-125 Series User Manual preview
TAP-125 Series
Brand: Moxa Technologies Pages: 51

Brands by name

Popular brands

Load more brands