9-1
9. The Status Screens
The Status Screens are used to display status information about the switched outlets,
Network Port, Plug Groups, Current and Power Metering and the Alarm Log and Audit
Log. The Status Screens are available via both the Text Interface and Web Browser
Interface.
9.1. Product Status
The Product Status Screen lists the model number, power rating, input line count, input
line frequency and software version and other general information for your VMR/NPS
unit. To display the Product Status Screen via the Text Interface, type
/J *
and then
press
[Enter]
. To display the Product Status Screen via the Web Browser Interface,
click on the "Product Status" link.
Note:
The Information provided by the Product Status Screen is intended
mainly to assist WTI support personnel with the diagnosis of user equipment
problems.
9.2. The Network Status Screen
The Network Status screen shows activity at the VMR/NPS's 16 virtual network ports. To
view the Network Status Screen, you must access command mode using a password
that permits access to Administrator Level commands.
To display the Network Status Screen via the Text Interface, type
/SN
and press
[Enter]
.
To display the Network Status Screen via the Web Browser Interface, click on the
Network Status link.
