WTC DEP 300s, User Manual

Page: 72 / 137

M035030-V2.0-Q06905/07-2017
69 of 104
LEVEL 1. 3 REVIEW SETUPS MENU
WTC weld controls use a number of programmable settings, called
set-up parameters, to enable you to customize a weld control to meet
your application requirements.
The set-up parameters tell the control about its operating
environment: how to react to certain conditions (as FAULT or ALERT
conditions) and how to react when certain inputs become active.
Every device has a unique set of parameters. Refer to the Operator’s
Manual provided with the weld device for more information.
from the Program Mode display menu, selects the Review
Setup display, which is used to see or change the current settings for a
weld control’s set-up parameters.
The weld control will ignore changes to certain set-up parameters
(such as those controlling retract operation) until power to the device
is cycled (turned off and then back on).
Because these settings control operation of the weld device, extreme
care should be exercised before making changes to set-up
parameters!