WTC DEP 300s, User Manual

Page: 30 / 137

M035030-V2.0-Q06905/07-2017
27 of 40 Connect to the weld control via the serial network
PAGE 2 - FIELDBUS:
The FieldBus I/O and configuration parameters can be individually
selected for back up. Using the movement keys
navigate to desired field and press to select. Press to
initiate the Backup.
If the DEP successfully connects to the weld timer, the backup
sequence will begin automatically. If the DEP does not detect the weld
timer on the serial network, the message “No Serial Devices Found”
will appear on the screen. If this occurs, ensure the DEP is properly
connected to the weld timer and repeat the backup process.
When the restore sequence is complete, the DEP will return to the
Backup / Restore Menu.
PAGE 3 - EIP:
The EIP I/O and configuration parameters can be individually selected
for back up. Using the movement keys
navigate to
the desired field and press to select, the press to initiate
Backup.