WTC DEP 300s, User Manual

Page: 17 / 137

M035030-V2.0-Q06905/07-2017
14 of 18
CURSOR MOVEMENT KEYS
The directional arrows keys are used to both move the cursor and
scroll through displays
NUMERIC KEYS
ALPHA KEYS
UP, DOWN, LEFT, RIGHT: These keys
move the cursor within data fields on the
display.
UP-RIGHT, DOWN-RIGHT: These keys
scroll up or down through pages on the
display.
UP-LEFT, DOWN-LEFT: These keys are
unassigned and not used.
The numeric keys are used to change the numeric
parameters of programmable functions and fea-
tures.
The alpha keys are used to assign alpha charac-
ters to the Welder ID in the Program Mode
menu.
NOTE: To enter an alpha character, press the
key first, then press the appropriate
alpha key(s). Note the shift key will remain locked
ON (indicated by the lit green LED) until the shift
key is pressed again.