M035030-V2.0-Q06905/07-2017
114 of 120
The following describes the data tags displayed in the
RAFT
Status
Menu:
BACK
Press
to return back to the previous
Status Menu screen.
REF COPY
Press
to copy the RAFT Reference Weld
data from one schedule to another.
R MEASURE
Press
to turn the R Measure Mode ON
or OFF.
REF OFF
Press
to turn the Reference Mode ON or
OFF.
NOTE:
The data displayed in this menu may vary depending upon the cus-
tomers application requirements. For application specific information,
consult the weld control firmware manual.
SEQ#
Sequence (schedule) number
Mode
AdaptQ Mode ON/OFF (0=OFF, 1=ON)
ref h
Total heat of the Reference Weld
h
Total heat
exp cy
The number of milliseconds since the
beginning of the weld at which expulsion
was detected
PI
Process Integrity
ref e
Total energy of the Reference Weld
Summary of Contents for DEP 300s
