WTC DEP 300s, User Manual

Page: 128 / 137

M035030-V2.0-Q06905/07-2017
125 of 126
EDITING A PARAMETER
To change a function parameter, perform the following steps:
B
Using the and keys move the cursor over the
function to be edited and press .
C
A window will appear around the function parameters at the
bottom of the screen. Press the and keys to
move the cursor over the parameter to be edited.
D
Using the keys, enter the desired parameter and

press .
Repeat steps 2 - 3 as necessary if additional parameters within
the function require editing.

E
Press Apply to save the changes to DEP memory.
F
Press the DOWNLOAD key to download and save the
changes to the weld control. The message “Download
Complete” will appear to indicate completion of the change.