3
X
Pac
Notice
Legislation stipulates that workers handling hy-
draulic driven riveting tools must be trained and
instructed. The training and instruction must be
carried out by a Wieländer+Schill instructor or an
officially authorized W+S representative.
State-of-the-art technology
This riveting tool represents state-of-the art tech-
nology. To ensure the functionality of the equip-
ment, it must be operated in a proper and safe
manner.
1.1 Notes regarding this manual
Handling
All handling necessary to ensure correct operati-
on is described in the instruction manual. No work
method other than that expressly approved by the
manufacturer may be used.
Faults
In the event of a fault, the user may only carry out
repair work for the faults for which the relevant
maintenance process is described in this manual.
1.2 Explanation of symbols
There are some sections of this manual that use internationally known warning symbols, warning notes
and general instructional symbols.
The individual symbols are explained below.
Follow all instructions and safety advice..
Observe instruction
manual
Observe general
instructions
Wear face mask
Wear gloves
Warning!
General source of danger
Warning!
Hand could become trapped
Warning!
Fingers could become
trapped
Warning!
Danger of environmental
contamination
Warning!
System under pressure
Please note the
following!
Read the instruction manual
Read the instruction manual carefully before using the riveting tool
Arrow to clarify
compression
Arrow showing directionn
Audibly engage
Note arrow
1
