13
X
Pac
3.3 Example: Mounting the mandrel and die
Hold the side plate with your finger.
Screw the required mandrel into the C-
arm.
Do not use any tools for tightening.
Only tighten by hand!
Before each assembly of the rivet in-
serts, the correct choice of the setting
head and closing head to the rivet must
be taken from the repair instructions.
Check that the riveting heads are firmly
seated after each riveting process. Rivet
inserts that have become loose present
a hazard and can lead to equipment da
-
mage or injuries.
Hand-tighten the riveting head provided.
Apply no excessive force!
Screw the corresponding counterpart
into the insert on the opposite side of the
C-arm (plunger rod) with the included
spacing adapter – hand tighten.
Abb. 3.3.a
Abb. 3.3..b
Abb. 3.3.c
Abb. 3.3.d
Abb. 3.3.e
Abb. 3.3.f
