7
X
Pac
2.4 Safety instructions
The hydraulic tool kit is strictly approved
only for the purpose intended by the
manufacturer.
Only genuine accessories may be used.
Use of non-genuine tools or accessories
represents a major safety hazard.
Ensure that only trained and instructed
personnel use this equipment. Use of the
equipment by personnel that have not
been trained and instructed is prohibited.
Ensure that the instruction manual is
made available to operating personnel.
Observe the applicable national regulati-
ons for accident prevention.
Because metallic parts can break up and
fly off with high energy if the tool is faulty
or operated incorrectly, protective gloves
and face mask must strictly be worn for
all applications of the equipment.
As a result there is a risk of severe physical
injury.
Never throw the tool or allow it to fall. Ne-
ver misuse the tool or let untrained per-
sonnel use it.
The tool must only be used in ambient
temperature of above 5 °C (41°F) and up
to maximum 50 °C (122°F).
The tool must never be used in potenti-
ally explosive areas.
Before starting work, always ensure that
the pressure regulator is set according to
the work requirements!
The manufacturer accepts no liability for
damage or injury caused by improper
repair or the use of replacement parts
made by other manufacturers..
