RObOt IntERACtIOn
Distance:
Around 24”
RS Media can interact with any one of the following robotic
companions at a time: Roboreptile, Robosapien™ V2, RS Media™,
Roboraptor™, or Robopet™.
To have RS Media interact with his companions, align RS Media facing the
other robot, on a level surface with a clear line of sight. Turn RS Media’s
companion on and then press the associated button combination on the
remote controller to initiate the interaction.
Rs Media™ / Robosapien™ V2 interaction
RS Media:
To initiate the interaction between two RS Medias, you must
point the remote controller at only one RS Media.
Robosapien V2:
To initiate the interaction between RS Media and
Robosapien V2, point the remote controller only at RS Media.
NOTE: RS Media’s remote controller can also operate Robosapien V2.
MODE
BUTTON COMBINATION
Arm mode
Roboreptile™ interaction
When you turn Roboreptile on, he goes through a brief wait state.
NOTE: You should initiate the interaction routine before Roboreptile
enters Free Roam mode; otherwise, you will have to start the
process over. To keep Roboreptile from entering Free Roam mode,
press the stop button on Roboreptile’s remote controller.
MODE
BUTTON COMBINATION
Control mode
+
Roboraptor™ interaction
When you turn Roboraptor on, he goes through a brief wait state.
NOTE: You should initiate the interaction routine before Roboraptor
enters Free Roam mode; otherwise, you will have to start the
process over. To keep Roboraptor from entering Free Roam mode,
press the stop button on Roboraptor’s remote controller.
MODE
BUTTON COMBINATION
Arm mode
+
Distance: Around 24”
Distance: Around 24”
Summary of Contents for RS Media
Page 59: ......
