WowWee RS Media, User Manual

Page: 9 / 60

Rs Media remote controller
Battery requirements
Your RS Media remote controller is powered by 3 x “AA” size batteries
(not included). We recommend using only top-quality alkaline
batteries.
Battery installation
To install or change batteries in RS Media remote controller:
1. Locate the battery compartment on the underside of the
remote controller.
2. Using a Phillips screwdriver (not included), remove the battery
compartment cover.
3. Insert batteries into the remote controller as illustrated in the
diagram.
4. Replace the battery compartment covers and then replace
the screw.
Important battery information
• Use only fresh batteries of the required size and recommended type.
• Do not mix old and new batteries, different types of batteries
[standard (Carbon-Zinc), Alkaline or rechargeable] or rechargeable
batteries of different capacities.
• Rechargeable batteries are only to be charged under adult supervision.
• Respect the correct polarity, (+) and (-) as indicated.
• Do not try to recharge non-rechargeable batteries.
• Do not dispose of batteries in fire. Batteries might explode or leak.
• Do not use different type/brand of batteries at the same time.
• The supply terminals are not to be short-circuited.
• Remove exhausted batteries from the toy.
• Batteries should be replaced by adults.
• Remove batteries if the toy is not going to be played with for
some time.
• The packaging should be kept since it contains important information.
• Rechargeable batteries are to be removed from RS Media and the
controller before being charged.
POWER And bAttERy dEtAILs
BaCk View of the ControLLer