Instruction Manual
K SERIES Cryostorage System
IM: CryoCeK
Revision: 02
Approved by: CB
Page
35
of
87
No
Steps of procedure
Display and notes
This refrigerator number will be printed in the page headings of the data log when it is
printed out. A unique number should be chosen for each refrigerator so that printouts from
different refrigerators may be identified.
If the refrigerator is linked to a PC it will only respond to commands which contain the
correct refrigerator number (unless set to 00).
17
Use the + and - keys to set the refrigerator
number:
the REFRIGERATOR NO. may be set to
any number between 00 and 98
Press
key when finished
The following message (example) will appear:
The real time clock and RAM require a minimum of 2.2 V to function correctly and retain
their settings when mains power is removed.
If the battery voltage is too low a warning will be displayed and the clock settings should be
checked.
A warning will also be given if the battery voltage is too high. This indicates a battery fault
(possible open circuit).
18
Press
key to finish
The following message (example) will appear:
A cursor will appear under the day digits
19
Use the + and - keys to set the correct
day of the month
Use the
key to move the cursor to the
month digits
Repeat this step for month, year, hour and
minute settings
If a mistake is made use the
key to step
the cursor backwards
When the correct date and time setting
has been obtained use the
key to move
the cursor to the minutes digits again
Press
key once more to finish
The following message (example) will appear:
