7-8
Cloning your TriCoder
1. Make sure you are connected to the USB cable and that your
TriCoder is turned on.
2. Start the TriCoder Utilities if it isn't already running.
3. Click on the TriCoder Upload tab
4. Highlight Cloning in the left panel.
5. Select the directory or folder you want to upload your cloning file
to in the right panel.
6. Click the arrow between the panels. The file is saved as
"
cloning.cln
" and you are finished!
Downloading from the computer to your TriCoder
You can download saved files on your computer back into your TriCoder
using the TriCoder Utilities in either serial or high-speed USB mode. The
files must be valid TriCoder programs, tables or clone files. TriCoder
programs can be created on your computer using the Virtual TriCoder or
created on the TriCoder itself. Tables must conform to the table format
required by the TriCoder (see
Chapter 12
: Tables and Pick Lists
) and your
TriCoder memory must be partitioned before it can accept any tables.
Also, you will not be allowed to download anything to your TriCoder if
there is currently data stored in your TriCoder. Before you download
anything to your TriCoder, make sure you upload any data files and delete
them from your TriCoder. If there is data in your TriCoder and you try to
download a file to it, you will see the message:
NOT ALLOWED TO RCV
HIT ANY KEY_
