4-8
To change the
Terminator Character
using the keypad:
•
get into
PROGRAMMING MODE
•
choose
5
for
Change Setup
•
choose
1
for
Computer
•
Press
ENTER
until you see
TERMINATOR CHAR.
•
Press
2
•
Press
F1
•
Press
F1
again to exit
PROGRAMMING MODE
To change it using
TriCoder Utilities
and high speed USB:
•
open TriCoder Utilities
•
choose
Tools
, then
TriCoder Setup
from the menu.
•
Click the Computer tab, then click the button that corresponds to
"no Terminator Character"
•
Click OK
2. Program the Upload Prefix and Upload Suffix
After setting the
Terminator Character
to
NONE
, the next step is to
enter
PROGRAMMING MODE
and program the
Upload Prefix
and
Upload Suffix
for each field of data. For Program #1, we will program
the
Upload Prefix
and
Upload Suffix
as follows:
Statement Prompt
Upload Prefix
Upload Suffix
ENTER ITEM NO.
“ (
double quote
)
“, (
double quote comma
)
ENTER QUANTITY
“ (
double quote
) “CR
(
double quote carriage return
)
•
Put the TriCoder in
PROGRAMMING MODE
•
Press
1
at the
Create Programs
prompt (to edit program #1)
•
Press
YES
at the
EDIT PROGRAM #1?
prompt
If you have no data collected in the TriCoder, press
ENTER
until you
see:
UPLOAD PREFIX
01
_
If you have data collected in the TriCoder (assuming you are following
the tutorial), you will see the
Upload Prefix
prompt immediately. This
is because the TriCoder will allow you to edit ONLY the
Upload
Prefix
and
Upload Suffix
if data is currently in memory. At the
Upload Prefix 01
prompt, scan the “
double quote
” bar code on the
Full
ASCII Menu.
UPLOAD PREFIX
01
“_
Press the
ENTER
key to complete the change. Press the ENTER key
