9-3
Upload to TriCoder
– click on this button to upload a program file to the
TriCoder. You can upload a new file you have created or one stored on disk.
When uploading a file by USB to the TriCoder, you must start the
transmitting program first and then start the TriCoder’s
Receive Program
next. Follow the instructions on the TriCoder for USB downloads or uploads.
When uploading a file by serial port to the TriCoder, you must start the
RECEIVE PROGRAM process first on the TriCoder. See
Chapter
10
;
Transmitting and Receiving programs
for details. You will also need to
know which serial port you are connected to and what the serial parameters
(baud, parity, etc.) are configured as in the TriCoder. It is best to use the
default settings if you can.
