6-28
the host, except ACK/NAK and XON/XOFF if configured to use those
protocols.
Data Security OFF
allows the operator full access to all TriCoder functions.
Data Security ON
prevents the operator from editing any data or leaving
DATA COLLECTION
mode. To exit
DATA COLLECTION
mode,
Data
Security
must be turned off either by scanning the bar coded Setup Menu or
by using the keypad - press
F1
, then
SHIFT
, then
D.
XMODEM
is a file transfer communications protocol widely supported and used
by programs including Windows HyperTerminal and Procomm.
XMODEM
has
significant data error-checking, making it reliable for data transmission over
phone lines.
XMODEM
is the protocol of choice for file transfers.
The
Date and Time Formats
allow you to change the display and output
formats of the date and time. When changing the TriCoder to use the
European format, remember to change the format first, then go to the
SET
DATE
parameter and enter the date using the European DD/MM/YY
format. See
Alternative Date Formats
for details.
Baud Rate
Set the
Baud Rate
to match your terminal or serial port.
300 0
600 1
1200 2
2400 3
4800 4
9600
5
19,200
6
38,400 7
Parity
None
0
Even 1
Odd 2
The
Parity
should match the parity setting of your Terminal. Parity can
vary on a PC serial port -
None
is usually used in conjunction with the
8
data bits
setting, while
Even or Odd
is associated with
7 data bits.
Data Bits
7 bits
0
8 bits
1
Set the
Data Bits
to match the setting used by your terminal or serial port.
