ECRESO FM 5kW / 10kW, user manual
–
11/2021
Page 76
WorldCast Systems SAS - 20 avenue Neil Armstrong - 33700 Mérignac (Bordeaux Métropole) FRANCE
+33 (0)5 57 928 928
–
www.worldcastsystems.com
–
Category
RTplus classes
MP3 id3v2
Description
PURCHASE
WPAY
WWWPAYMENT
Address where item can be purchased. Address
can be an url or a sms-number
GET_DATA
Retrieves either via a sms or url-link more data
about tag in RT1. (Info request via Point to
Point - unicast)
Six lines of PS Scroll can be configured. For each, set:
•
Text
(RDS.PS
n
.TEXT)
:
Text may include dynamic data (<ITEM….>, <INFO…>…)
that will only be sent if filled in,
and for ITEM type fields if the validity time frame is correct. Four dynamic data tags max may be included.
•
Repetition
(RDS.PS
n
.REP): The encoder will repeat the line before sending the next one (max: 16 times). If
repetition is set between 1 and 16 for only one of the enabled strings, this one string will be sent
indefinitely*. If repetition is set 0 for all the enabled strings, the static PS is sent. If the repetition for several
enabled strings is set between 1 and 16, the sequence of these strings will be sent indefinitely*.
•
Enabled
(RDS.PS
n
.EN): Check the box for the line to be sent.
•
Center
(RDS.PS
n
.CENTER)
:
When scrolling is done word by word, the encoder may center each word in the
receiver screen. Only applicable when ‘Word’ is the chos
en increment
•
Increment
(RDS.PS
n
.INCREMENT)
:
Set the number of scrolling characters, from 1 to 8. Scrolling may be done
by word (value 0). In that case, the encoder will detect whole words (identifiable delimiters are: ‘ ‘, ‘
-
‘, ‘,’),
and fit as many whole words as possible on each screen.
•
Truncated
(RDS.PS
n
.TRUNCATE)
:
When scrolling is done word by word, the encoder truncates words longer
than the display screen (longer than 8 characters). Only applicable when ‘Word’ is the chosen increment.
•
Delay
(RDS.PS
n
.DELAY)
:
Time laps between 2 consecutive screens. When scrolling by letter, time laps
between 2 characters.
Example:
RDS.PS1.TEXT = Now playing <ITEM.TITLE> by <ITEM.ARTIST>
RDS.PS1.EN = ON
RDS.PS1.REP = 1
RDS.PS1.TEXT = You’re listening to <LONGNAME>
RDS.PS1.EN = ON
RDS.PS1.REP = 2
To ensure compatibility with legacy systems, the command PS_TEXT has been created. It is identical to the
command RDS.PS1.TEXT.
Sending dynamic data
Default port for the RDS console is port 2000. It is set on the System/Communication/Network page.
To send dynamic data, open a Telnet session on port 2000.
Example:
ARTISTNAME= Calexico
SONGTITLE= Miles from the Sea
STATIONNAMELONG= My Station
DURATION=3:41
For 3 minutes and 41 seconds, the following sequence will be repeated:
Now playing Miles from the Sea by Calexico
