PH: 866.476.9217
21
XI. ACCESSORIES
This Section describes the accessories available from WORKMASTER. The
attachments and lubrication products are those that we recommend the Customer
purchase based upon our specialized knowledge of and experience with the Opener and
the parts required or in similar applications. Maintaining an inventory of the
recommended lubricant, attachments, and accessories will significantly improve job site
safety, increase the Opener’s productivity, and reduce maintenance costs and down
time associated with emergency acquisitions.
This tapered, 1-piece Drive Fitting is designed
to fit every Railcar Capstan with full contact on
all sides. Its 1-1/2" female sq. socket creates a
large contact surface with the Impactor's Anvil.
With a forged core and precision machined
sides – tapered from a 1-1/2" square to a 3/4"
square tip – this Drive Fitting is built-to-last.
PART #: 33-10013
DRIVE FITTING
Unmovable obstacles and/or unloading site
gaps can make getting your Gate Opener close
to the Railcar’s capstan impossible! These
heavy-duty 12" and 20" Anvil Extensions make
the impossible, possible. Each Extension is
designed to not only extend your Gate Opener's
reach, but to do so without any torque loss.
They are precision machined, impact resistant,
and constructed of hardened tool steel.
12" EXTENSION, PART #: 33-10012
20" EXTENSION, PART #: 33-10020
ANVIL EXTENSION
