PH: 866.476.9217
7
9.
OIL CADDY
The Oil Caddy is welded to the Opener's Tool Box and is designed to serve a
dual purpose. Primarily, the Oil Caddy allows the operator to keep a bottle of
air tool oil on-hand at all times; secondly, the Oil Caddy serves as a reminder
to check the oil level in the FRL supplied with this Gate Opener. The oil level
should be checked daily.
10.
PIVOT GUARD
The Pivot Guard protects the pneumatic cylinder which shifts the pivoting
linkage at the cylinder plate forcing the shaft and fork frame to turn at a
predetermined angle. The Pivot Guard has safety lock pinholes that extend
through the pivoting linkage plates and restrict wheel direction change until
the pin is removed. This pivot wheel action allows the GO-A13-HA to travel
with rolling capstans.
11.
PIVOT LOCKING PIN
The Pivot Locking Pin is used to lock the wheels in the straight or pivot
position. The Pin, attached to the GO-A13-HA by a coated lanyard, must be
removed before actuating the Pivot Pull Switch. The Pin should be reinserted
into the correct pinhole on the Pivot Guard when the wheels are in the
desired position. A label located on the Pivot Guard, See Figure 3, shows
which pin hole is used to lock the GO-A13-HA's wheels in the desired
position.
Figure 3: Locking Pin Label
