User Manual
DIGILINE Series
Page 27
DIGILINE 8 / DIGILINE MX
Equalizer Output
In this example we have created an equalization filter at Output 3 (
Output Channel = 3
)
We employed the 1st band (
Band Index = 1
), so we started on the left side of
response curve (
See 3.1.1 EQ on page 17 for additional information
).
We selected Low Shelving filter type (
Type = 4
). This number is determined by the order
occupies within the filter type drop-down.
CONSIDERING THAT THE FIRST FILTER (BYPASS)
HAS VALUE 0.
Bypass = 0, Peak = 1, Low Pass = 2, HighPass = 3, Low Shelving = 4
High Shelving = 5, Band Pass = 6, Notch = 7, All Pass = 8
Parameters
Frequency (in Hz)
,
Gain (in dB)
and
Q
, allow to adjust the values ?
?
of the filter created
CrossOver
In this case we have created two crossover filters at Output 3 (
Output Channel = 3
)
We have created a tButterworth type high-pass filter (
high pass type = 0
) and another Linkwith-Riley as
low pass filter (
Low pass type = 3
). The nomenclature of these filters is due to the following table:
Butterworth
0
Butterworth
1
Linkwith-Riley
2
Linkwith-Riley
3
Bessel
4
Bessel
5
NOT USED 6 NOT USED 7
TYPE VALUE TYPE VALUE
ByPass
8
ByPass
8
HIGH PASS TYPE
LOW PASS TYPE
High / Low pass order
p
are the order of the filter. (
In this case 3rd and 2nd respectively
)
High / Low pass frequency
values ?
?
are the frequency in the filter in Hz (
150 Hz and 12,000 Hz in this
case
).
(
See 3.1.3 XOVER on page 18 for additional information
).
arameters
Summary of Contents for Digiline 8
Page 1: ...User manual POWER www work es Rev 13 04 01 ...
Page 2: ......
Page 35: ...DIGILINE Series Notes ...
