User Manual
DIGILINE Series
Page 32
DIGILINE 8 / DIGILINE MX
3. Once the parameter has been edited, the application generates the ASCII string in the upper window.
4. This line is generated in two formats at once, depending on what you go for. either by
Ethernet port or by RS232 serial port. (
See Section 2.2.3. OSC HISTORY for additional information
).
5. Press
Copy Ethernet
or
Copy
, according to the control mode to use, and the command line will be
copied to the clipboard for later use.
NOTE: Click the Help icon in the lower left corner for additional information on this application.
NOTE: For an explanation of the commands that incorporate Digiline series devices, see section 3.3. GPI
for additional information.
Serial
In this example we have selected
command
: Gain Value and
established a value of 3 dB in the
output 1
Output
Summary of Contents for Digiline 8
Page 1: ...User manual POWER www work es Rev 13 04 01 ...
Page 2: ......
Page 35: ...DIGILINE Series Notes ...
