2.2.2. PROJECT INSPECTOR
The
PROJECT INSPECTOR
window allows you to create projects with any WorkCAD compatible device associating
it with a virtual device from the library or working “in situ” with the physical device connected to the network.
The creating project involves ALL devices grouped under the project. Click the
File
tab to managing projects, creating a
new one, opening an existing or saving a new project.
When you select one device (using Library or Network tabs), the device will be assigned to a group on this menu.
Depending on the color of the circle closed the name, a different state will be present:
Digiline MX in
CONNECTED state
Digiline MX in
DISCONNECTED state
and Digiline 8,(created
from the library), and
not associated with
any physical device
Press Edit to change featuras like:
- Interface language (English/Spanish)
- Enable/Disable the search of updates
- Enable/Disable the hardware acceleration
(This features must be disable if the software
shows problems loading the device)
Two devices in project Inspector: Physical (green circle),
Virtual (no circle)
C. Select virtual Device
and press Copy
Device.
D. Select Physical
Device and press
Paste Device.
A. Create a virtual device and configure it B. Load a device from Network
A. Create a virtual device and configure it. When finish, store all information in a project file (*.wpj) using File Tab. In the installation.
Load the project using the same File tab. Now follow the previous B, C, D points.
1st Possibility
2nd Possibility
User Manual
DIGILINE Series
Page 12
DIGILINE 8 / DIGILINE MX
Summary of Contents for Digiline 8
Page 1: ...User manual POWER www work es Rev 13 04 01 ...
Page 2: ......
Page 35: ...DIGILINE Series Notes ...