User Manual
DIGILINE Series
Page 24
DIGILINE 8 / DIGILINE MX
Method Editor
tab allows the creation of commands with a simple and intuitive edition of its values ?
?
and
states.
WorkCAD recognize the device and
Commands List
window displays a popup menu with commands
susceptible editing along with a brief description of their duties.
Each selected command has a set of values ?
?
to edit, depending on the purpose of that command.
In this example we have selected the
Output Gain
command to edit the output value and their status.
- On the first line enter the value of the output channel to modify.
- In the second line the dB value you want for the selected output
- The third line allows you to select the Mute status. In this case the options are T (true) if you want the output
is in Mute, or F (false) if we do not want to mute the output.
- The fourth line to select the state Invert. In this case the selection is performed in the same manner as in
Mute previous value.
In this example we have edied this command with the following values: At output 1 we have given a value of
4 dB, leaving the output without applying a Mute or invert its phase
Once written the values?
?
, click the icon and the command will appear in the OSC Methods
If you press the icon will delete the selected command line.
6
3.3.1. Commands
Summary of Contents for Digiline 8
Page 1: ...User manual POWER www work es Rev 13 04 01 ...
Page 2: ......
Page 35: ...DIGILINE Series Notes ...
