23 | UM-PP-EN-03
3.6
Electrical Connection
IMPORTANT- The power cord must be properly protected at all times, both when in use and storage.
Below are the standard electrical requirements by region. There are different options depending on
which model you own. If you have a different electrical configuration, please contact your sales
representative.
Ungrounded outlets or power-strips may NOT be used.
DO NOT BEND OR REMOVE PRONGS
. The plugs are polarized, meaning the prongs are different
sizes and the plug can only fit in the outlet one way. If other power cord plugs are required, please
contact WOODWAY.
Before connecting the treadmill to the power supply, the information on main voltage and
frequency (found on the name plate) is to be compared with the on-site connection values. Only
connect the device if the values match. Power surges or voltage drops can cause malfunctions or
defects in the device.
DANGER
Danger of Death by Electric Shock!
Improper handling of electrical equipment by unqualified persons
can cause fatal electrical shock.
►
If necessary, allow only qualified personnel to perform electrical
installation.
►
The power cord must not come into contact with hot surfaces or
sharp edges.
►
Electrical parts such as motor, power cord, and power switch must
not come in contact with water.
WARNING
Danger of Injury by Falling when Switching the Device Off!
A complete shutdown of the unit caused by power surges or voltage
dips can cause abrupt deceleration of the running surface belt.
►
In order to avoid malfunctions, all data on the name plate must
correspond with the actual terminal values.
WARNING
Danger of Injury by Tripping Over Wires!
Improperly installed wires present a tripping hazard and danger of
injury. Safely lay power cords, interface cable, etc. outside of walking
areas.
