50 | UM-PP-EN-03
Removing the Railing Mount
PPS Med or PPS Ortho
•
Loosen the upper fixing screw (front and rear) with a 13/
64” (
5 mm) Allen wrench.
•
Remove the fixing screw at the bottom with a
½” (
13 mm) box wrench. The screws engage small
metal plates (inserted into the railing stabilizer).
•
After the mounts are released on both sides of the railing, spread the railing slightly to remove
the mount from the treadmill.
Fig. 27 Fixing screws in railing mount, PPS Ortho/PPS Med
PPS Bari-Mill
•
Loosen the base frame mount using a
43/64” (
17 mm) box wrench (one bolt per rail). The inner
nut is secured by an additional counter nut.
•
Pull the bar railings vertically out of the guide.
