65 | UM-PP-EN-03
The LEDs to the right of the display (Pos. 9 to 11) indicate the unit of measurement of the displayed
value. It is also possible to choose between parameters that are displayed on the same screen. The
data monitor is a display device without the ability to control the treadmill.
Speed
The 3-digit display (Pos. 2), displays the current speed of the treadmill in km/h or m/s and is adjusted
using a button next to the display. The sign in front of the displayed value can be used to indicate a
reverse running belt (if treadmill offers the function).
Distance and Calories Burned
In the display (Pos. 3) the distance and calorie consumption of the runner since the last time the
treadmill was switched on are alternately shown at intervals of 10 seconds. The upper value shows
the distance and the lower value the calorie consumption. The distance and calorie values are
maintained after the treadmill is stopped. They are deleted after restarting the treadmill using the
keypad on the railing or the remote control.
Calories are calculated using the ACSM formula,
([Workout METs] * 3.5 * [User’s weight in kg.] / 200). If no weight is entered, the calories are calculated
based on a standard weight of 150 lbs. (70 kg).
Training Duration
The training duration (Pos. 4) is reset with each restart of the treadmill. The display shows the time
elapsed since the start of the treadmill in 00:00 format. Then the upper LED switches off and the lower
starts flashing in its place to show the new status.
Incline and Pulse
These two values (Pos. 5) are also indicated with the same display. A symbol indicates the incline as
well as the speed. A negative sign can only be displayed if the treadmill features such a function. The
direction of the incline can only be changed via PC with a remote control or the keypad on the railing.
After a change to the incline, the new value will appear in the display for 5 seconds. The upper of the
two LEDs next to the display is active for this purpose. If the slope remains unchanged, the display
will switch to the current pulse frequency of the runner after this period of 5 seconds. If the incline is
not changed, the incline value is only shown in the display again when the wireless connection to the
pulse sensor on the runner's body is interrupted. The incline value is displayed in the monitor if the
treadmill does not have a pulse sensor.
Treadmill Control Modes
The control mode is indicated by three LEDs on the right side of the monitor (Pos. 9 to 11).
The LEDs have the following meanings:
•
Pos. 9: The manual control via the keypad on the railing is active.
•
Pos. 10: The treadmill is being used in STOP mode. In this mode the direction can only be
changed with a PC, and running or pulse programs can only be started with the PC.
•
Pos. 11: The remote control (running/pulse program) is started via a PC or other peripheral
device.
Data Monitor (DaMo) Control Unit
The data monitor has 3 buttons (Pos. 1, 6, 7) and an emergency stop magnetic switch (Pos. 8).
