4
TD_PCM1x_Packages_Function/Operation_08.04_GB
WARNING
Read this entire manual and all other publications pertaining to the work to be performed before installing, operating,
or servicing this equipment. Practice all plant and safety instructions and precautions. Failure to follow instructions can
cause personal injury and/or property damage.
The engine, turbine, or other type of prime mover should be equipped with an overspeed (overtemperature, or over-
pressure, where applicable) shutdown unit(s), that operates totally independently of the prime mover control unit(s) to
protect against runaway or damage to the engine, turbine, or other type of prime mover with possible personal injury
or loss of life should the mechanical-hydraulic governor(s) or electric control(s), the actuator(s), fuel control(s), the driving
mechanism(s), the linkage(s), or the controlled unit(s) fail.
CAUTION
To prevent damage to a control system that uses an alternator or battery-charging unit, make sure the charging unit is
turned off before disconnecting the battery from the system.
Electronic controls contain static-sensitive parts. Observe the following precautions to prevent damage to these parts.
•
Discharge body static before handling the control (with power to the control turned off, contact a grounded surface
and maintain contact while handling the control).
•
Avoid all plastic, vinyl, and Styrofoam (except antistatic versions) around printed circuit boards.
•
Do not touch the components or conductors on a printed circuit board with your hands or with conductive units.
Important Definitions
WARNING
To avoid the destruction of electric components due to improper handling, please read and adhere to the relevant
notes.
CAUTION
Indicates a potentially hazardous situation that, if not avoided, could result in damage to equipment. This note should
absolutely be observed when connecting the unit.
NOTE
References to other notes and supplements as well as tables and lists are identified by means of the "i" symbol. Most of
the referenced sections are included in the Annex.
SEG reserves the right to update any portion of this publication at any time. Information provided by SEG is believed to be correct and
reliable. However, no responsibility is assumed by SEG unless otherwise expressly undertaken.
©
SEG
All Rights Reserved.
