TD_PCM1x_Packages_Function/Operation_08.04_GB
5
1 General
Information
Type
English
German
PCM1x Packages (Pxx)
PCM1x Packages (Pxx) - Installation
this manual
!
37275 GR37275
PCM1x Packages (Pxx) - Configuration
37276 GR37276
PCM1x Packages (Pxx) - Function/Operation
37274 GR37274
Table 1.1: Manual - Overview
The PCM1 series generator set controllers provide the following functions:
Gen-set control
•
Engine and generator protection
•
Engine data measurement -
- including oil pressure and oil temperature, coolant temperature, battery voltage, speed,
service hours, etc.
•
Generator data measurement -
- including. voltage, current, power, kvar, kW, kWh, etc.
•
Engine start/stop procedure
•
Alarm display with breaker trip and engine shutdown
•
Emergency operation with mains failure recognition and automatic engine start incl. change-over-logic
•
Control of voltage, frequency, real power and reactive power
•
Real power and reactive power load sharing including load management with automatic start/stop of others and re-
dundant gensets.
•
Synchronization of one or two power circuit breakers
•
CAN bus communications to engine controllers and plant management systems
Intended Use
The unit must only be operated according to the guidelines described in this manual. The pre-
requisite for a proper and safe operation of the product is correct transportation, storage, and installation as
well as careful operation and maintenance.
NOTE
This manual has been developed for an unit fitted with all available options. Inputs/outputs, functions, configuration
screens and other details described, which do not exist on your unit may be ignored.
The present manual has been prepared to enable the installation and commissioning of the unit. On account of the
large variety of parameter settings, it is not possible to cover every possible combination. The manual is therefore only
a guide. In case of incorrect entries or a total loss of functions, the default settings can be taken from the enclosed list
of parameters.
