48
4)
Replace the location LED.
1. Take out the optical module.
3.
Use tweezers to remove the
location LED wire from the
conductors of the connector.
Note:
Record the sequence of
connection of conductor pins.
3. Use pliers to remove the glue on
the surface of the LED and
remove the LED from the fixed
hole.
4. Press a new LED to the bottom of
the fixed hole and use the AB glue
to attach the LED.
5. Insert conductors of the new LED
connecting wire back to the
connector in the right position.
The positive LED inserts to the #1
number marked on the black
connector and negative polar
inserts to 2# number.
Summary of Contents for InSight V-CHEM
Page 1: ...Veterinary Chemistry Analyser Service Manual...
Page 9: ...3 Back View Right View...
Page 42: ...36...
