Wood-mizer SHR-T Series, User Manual

Page: 51 / 110

Blade Wheel Alignment
MHdoc051512 4-7
4
8. Check the position of the blade on the idle-side blade wheel.
See Figure 4-6. The horizontal tilt of the blade wheel should be adjusted so that the gullet
of an 1-1/4" blade is 3.0 mm out from the front edge of the wheel (± 1.0 mm).
See Figure 4-7. Use the cant control adjustment to adjust the idle-side blade wheel. If the
blade is too far forward on the wheel, turn the cant control counterclockwise. If it is too far
back on the wheel, turn the cant control clockwise.
FIG. 4-6
FIG. 4-7
150060
1 1/4"
Blade
± 1 mm (0.04”)
3.0 mm (0.12”)
Cant Adjustment Bolt
RS_030