Wood-mizer SHR-T Series, User Manual

Page: 34 / 110

Obs³uga maszyny
Operation Procedure
2
2-15 MHdoc051512 Obs³uga maszyny
2.11 Operation Procedure
1. Install a blade if necessary.
WARNING! Always wear gloves and eye protection when
handling bandsaw blades. Changing blades is safest when
done by one person! Keep all other persons away from
area when coiling, carrying or changing a blade. Failure to
do so may result in serious injury.
2. Close the blade housing cover.
3. Tension the blade as described in Section 2.4 .
4. Spin the blade wheel by hand.
WARNING! Use extreme caution when spinning the blade
wheel by hand. Make sure hands are clear of blade and
wheel spokes before spinning. Failure to do so may result
in serious injury.
5. Check alignment of the blade on the blade wheels and blade guides. Adjust as
necessary.
6. Raise or lower the saw head to the desired setting.
7. Adjust the clamp roller guide to the width of material to be cut.
DANGER! Make sure all guards and covers are in place
and secured before operating the resaw. Failure to do so
may result in serious injury.
8. Perform pre-start check.
9. Start the blade motor.
10. Using the feed track speed switch, set the feed rate as desired.
DANGER! Always be sure all persons are out of the path of
the blade before starting the motor. Failure to do so will
result in serious injury.
WARNING! Always wear eye, ear, respiration and foot
protection when operating or servicing your resaw.