Setup & Operation
Assembly
2
2-1
PGdoc031914
Setup & Operation
SECTION 2 SETUP & OPERATION
2.1
Assembly
Place the grinder on a table or workbench sturdy enough to support the weight of the
machine. Be sure there is enough room on either side of the grinder to allow for the blade
to travel.
Drip Tray/Grinder
See Figure 2-1.
Place the drip tray on the table with the drain tube overhanging the rear of the table. Place
a container under the drain tube to catch any oil from overspray that collects in the drip
tray.
Remove the hood from the grinder assembly and set aside. Place the grinder in position
on the drip tray.
Place a level on one side of the grinder base frame and adjust the rear foot until level.
Repeat on the other side of the frame.
FIG. 2-1
Grinder
Assembly
Adjustable
Rear Foot
Drain Tube
Drip Tray
Tabletop
PG0005-1
