Maintenance & Alignment
Maintenance
Maintenance & Alignment
PGdoc031914
3-2
3
See Figure 3-1.
Lubricate Index Cam Pivot
A grease fitting is provided on the index cam pivot. Apply one to two squeezes of NLGI #2
lithium grease weekly to keep the index arm threads lubricated.
Blade Wipers
Loosen the blade wiper thumb screws and adjust the pads so they wipe oil from the blade
as it passes through the pads.
Blade Clamp Wear Plate
Inspect the wear plate periodically for damage or excessive wear and replace as neces-
sary. The plate should keep the blade from contacting the back clamp block.
Drive Belt Tension
If the drive belt begins to slip, tension the belt. Loosen the four motor mount bolts and pry
the motor back to tighten the belt. Retighten the motor mount bolts. When maximum
adjustment is reached, replace the belt.
FIG. 3-1
Index Pivot
Grease Fitting
Blade
Wipers
Clamp
Wear Plate
PG0005-15
Motor Mount
Bolts (4)
