General Information
Safety
1
1-1
PGdoc031914
General Information
SECTION 1 GENERAL INFORMATION
1.1
Safety
This symbol calls your attention to instructions concerning your personal safety. Be sure
to observe and follow these instructions. This symbol accompanies a signal word. The
word
DANGER
indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING
suggests a potentially hazardous situation
which, if not avoided, could result in death or serious injury.
CAUTION
refers to potentially
hazardous situations which, if not avoided, may result in minor or moderate injury to per-
sons or equipment. Read all safety instructions before operating this equipment and
observe all safety warnings!
Warning stripes are placed on areas where a single decal would be insufficient. To avoid
serious injury, keep out of the path of any equipment marked with warning stripes.
Read and observe all safety instructions before operating this equipment! Also read any
additional manufacturer’s manuals and observe any applicable safety instructions includ-
ing dangers, warnings, and cautions.
Always be sure that all safety decals are clean and readable. Replace all damaged safety
decals to prevent personal injury or damage to the equipment. Contact your local distribu-
tor, or call your Customer Service Representative to order more decals.
IMPORTANT!
Always properly dispose of all by-products,
including debris, oil, and filters.
DANGER!
For the user’s safety, the power cord on this
product has a grounded plug. This power cord should only
be used with correctly grounded (3-hose) receptacles to
avoid electrical shock. To prevent electrical shock hazard,
this unit must be connected to a GFI (Ground Fault Inter-
rupter). The National Electrical Code, Article 680-41(A),
requires a GFI be installed in the branch circuit supplying
fountain equipment rated above 15 volts. See your local
electrical supply dealer for various brands of GFI’s.
DANGER!
Make sure all guards and covers are in place
and secured before operating the grinder. Failure to do so
may result in serious injury.
WARNING!
Always turn off and disconnect power before
performing any service to the machine.