Maintenance & Alignment
Checking the Rollers and Table Belt
5
5-7
EGdoc031621
Maintenance & Alignment
See Figure 5-9
4.
Reinstall the right guard and the infeed table arms.
5.3
Checking the Rollers and Table Belt
1.
Check the press rollers every 8 hours of operation. Remove any dirt or debris from them. Make sure
the rollers spin freely, without much play. If necessary, replace the rollers with the springs.
2.
Check the table belt every 8 hours of operation. Clean any debris from the belt.
5.4 Tensioning the Table Belt
See Figure 5-10
To adjust the table belt tension:
1.
Loosen the bolts A on both sides of the table.
FIG. 5-9
8
8
