Operation
Edger Setup
Operation
EGdoc031621
3-5
3
4. Emergency Stop Button
Push the emergency stop button to stop the blade and feed motors. Turn the emergency stop
clockwise to release the stop. The machine will not restart until the emergency stop is released.
3.3
Edger Setup
IMPORTANT!
Before starting to use the edger, you have to meet the
following conditions:
Set up the machine on firm and level ground.
When your EG350 edger is used indoors, it must be operated with a sawdust exhaust system
connected.
The EG350 edger must not be used outdoors when it is raining/snowing. In such a case, the
machine must be placed under a roof or indoors.
The machine should work in temperatures of –15
o
C to 40
o
C (5
o
F to 104
o
F) only.
The light intensity in the operator’s work-place must be 300 lux
1
.
The work-places for two operators of the edger are shown in the figure below.
1 The light source cannot cause the stroboscopic effect.
FIG. 3-6
!
