SETWORKS OPERATION
Start-Up Settings of the Controller
SETWORKS OPERATION
EGdoc031621
4-4
4
See Pic. 4-3.
Press
again - the controller will perform some movements of the blades in turn.
After performing the last movement, measure and enter the real distance between the saw heads
using the keypad. Confirm by pressing
.
The end of the function will be signalled and the controller will return to the normal mode
of operation.
3. Entering the real blade distance
To ensure that the upper display shows the correct distance between the blades, it is necessary to enter
the real distance. It must be done prior to the first start-up and also when:
- significant cutting inaccuracies occur;
- a sudden power disappearance occured when the controller was setting the blade distance;
- any repairs to the blade drive system were made.
To enter the real blade distance:
Press and hold
.
PIC. 4-3
TBS 01 Setworks
Real Size (mm)
Check real size
AUTO
CAL.
SAVE
SET
ABCDE
Position Size (mm)
ENTER
A
B
C
D
E
SET
REAL SIZE
AUTO
CAL.
ENTER
SET
REAL SIZE
