Wood-mizer EE20S-EMR, User Manual, Page: 82 / 159

Maintenance & Alignment
EG250 Safety Devices Inspection (CE version only)
6
6-23 EGdoc022715 Maintenance & Alignment

Push the E-STOP button located on the edger housing. The motor should stop. It should not be
possible to restart the motor until the E-STOP is released.
3. Cover Safety Switch Circuit Inspection

Start the main motor;

Open the cover ;

The main motor should stop;

Try to start the motor using the START button. It should not be possible to start the motor.

Close the cover;

The motor should remain turned off.
4. Sawdust Hopper Safety Switch Circuit Inspection

Start the main motor;

Open the sawdust hopper cover;

The main motor should stop;

Try to start the motor using the START button. It should not be possible to start the motor.
FIG. 6-18